No sooner did I decide to use grade 5 / zinc plated bolts, than I found a
company called GME Supply with a limited range of 3/8" galvanized grade 5
steel bolts and overtapped nuts in exactly the length I need.
Serendipity.
73 -- Brian -- K1LI
On Tue, Apr 28, 2009 at 9:26 AM, jim Jarvis <jimjarvis@optonline.net> wrote:
>
> K1LI is looking for bolts for his Rohn guy attachment brackets.
> Original galvanized bolts apparently are unavailable from any
> industrial sources.
>
> My Question is this: What's wrong with using stainless steel?
> It has to be sked 8 or something, I'm sure. But what is the impact
> of stainless adjacent to the zinc coated galvanizing?
>
> I've done this with leg bolts on Rohn towers many times, with no visible
> impact over periods of 5 or so years.
>
> Just curious about the assembled wisdom.
>
> On reflector responses only please, no directs.
> Minimizing email & only see digests.
>
> Tnx.
>
> N2EA
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|