Steve Davis -Davis RF Co. wrote:
> Looking at LMR 400 knock offs: The first question to ask is whether it
> is made in USA. Then by whom (if they will tell you), then be sure they are
> willing to give you a full spec. Then , based on their reaction to
> any/all of those criteria, judge who you are dealing with.
Amplifying on Steve's comments a bit..
You might also ask the vendor how they verify that it meets the spec
sheet. It's not unheard of for someone to publish a spec sheet that is
effectively "designed, but not tested to meet these specifications". If
they're retailing cable from "Bob's cableworks" which doesn't have a
fixed address, it might be good, it might not, depending on who showed
up to work. If it's from "Acme cableworks, an AS9001 company", at least
they have a process they follow (granted, it could be consistently bad,
but at least it's consistent!)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|