Towertalk
[Top] [All Lists]

Re: [TowerTalk] Idiom Press RotorCard DXA Installation

To: mrlogs <mrlogs@verizon.net>
Subject: Re: [TowerTalk] Idiom Press RotorCard DXA Installation
From: bill rubin <brubin2010@gmail.com>
Date: Sun, 22 Feb 2009 17:43:55 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
You need to use a terminal program to command the unit. Do a search on
the internet  tucows.com  or download.com to find one.

73 Bill N1HCW

On Sun, Feb 22, 2009 at 5:40 PM, mrlogs <mrlogs@verizon.net> wrote:
> Hi,
>  I tried installing my new Rotorcard DXA into my Yaesu 1000DXA controller 
> today. I hooked it up to my PC thru a Belkin Serial to USB connector. I know 
> the connector work's as I use it for another serial input..this was off and 
> no software opened & the PC had been restarted..
>
> I used Windows Hyperterminal for the terminal program...I set it at 4800 
> baud, etc, per the instructions..Com port 4 is what I used..
>
> Next, I hooked the PC board up to the controller & Serial to USB 
> connector..plugged the controller in, typed a capital "V" per instructions, 
> got all the copyright info, then typed the capital "K" per instructions..got 
> the repeating numbers in Hyperterminal..and adjusted everything to "270 deg 
> and "90 deg"" per the instr. (I had rotated the controller manually to "270 
> deg and 90 deg" as I calibrated it)..
>
> I tried ending the calibration program by typing a small "k"..nothing I typed 
> would show up in Hyperterminal
>
> I tried testing the rotor function by typing AP1030;AM!; per the instr.  
> wouldn't do anything, nothing I typed showed up in Hyperterminal
>
> I redid it all (after restarting  the PC..and starting over..nothing I typed 
> show's up in Hyperterminal...I checked the Device Mgr in Control Panel for 
> Com Port 4..it's working and set up @ 4800 baud, etc too & it say's it's 
> working OK..
>
> What am I missing..or is the RotorCard DXA sorta DOA?
>
> Any ideas?........Thanks in advance for any & all help..
>
>                               73'.          Tom  N3ZC
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>