Michael Tope wrote:
> jimlux wrote:
>>> But you don't get that.
>>
> If there is no unintentional mutual coupling to nearby structures and
> assuming that the array elements are identical, then you should get Z11
> = Z22 = Z33 to within measurement error. If you've got a nearby tower
> interacting with the array, then I would expect to see differences in
> Z11, Z22, and Z33 (again this assumes that Z11, Z22, and Z33 are
> mechanical identical).
Good point.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|