why does it need to be old fashioned? Look at the weller 240 watt gun
that K3LR uses to makeup pl-259 connectors in his 5 page article???
my guess is this article is on his web site. I made a copy of it here but
his web site will give you a good look at it.
73
Chet N4FX
----- Original Message -----
From: "Bill Axelrod" <bill@axelrods.org>
To: <TowerTalk@contesting.com>
Sent: Saturday, January 31, 2009 12:07 PM
Subject: [TowerTalk] Soldering irons
> Spring is almost here. Time to get ready for some major antenna work.
> I'd
> appreciate any leads to where I can find an old fashioned heavy-duty
> soldering iron with enough wattage to soldier outdoors like coax
> connectors
> on coax, ground wires to ground bus, etc. Trips to Home Depot, Lowes and
> looking through electronics catalogs like Mouser didn't find that great
> big
> iron.
>
> Any ideas?
>
> Thanks and 73... Bill ND9E
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|