Anne,
I don't have the drawings but maybe can help.
What exactly do you need? I've installed these over the years (mostly a long
time ago) and remember almost everything about them. Including the skinny drum
on the cable winch, which takes a zillion turns to crank out or in because it
was silly.
You're right, it's not self-supporting and its upper section is too skinny to
contain a rotator, so for a small beam, that must go on top.
Do you need replacement parts or something-?
Steve WB2WIK/6
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of wz7z
Sent: Thursday, January 22, 2009 3:07 PM
To: towertalk@contesting.com
Subject: [TowerTalk] vintage Tri-Ex tower/support
Importance: High
We have a HTZ-354 (id tag munged, but that's what it looks like) support and
have need of plans/drawings.
This manual crank up support is not self supporting. The first section has 3
tubing legs (not guy wires)
with turn buckles extending out to the ground anchors.
Anne
wz7z
Craig
kq6i
Peace, long-life, and gud DX!
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|