I found this out trying to use a six foot stainless CB whip with auto tuner
in bed of truck under it. No mount insulator on the market would withstand
the voltage generated by a 100 watt output radio tuned for 80 or 40 meters
for any length of time until I found delrin machined standoff made by a
fellow who sent me one and the problem is now fixed. The voltage across the
feed point of a short antenna can be considerable as I discovered.
Gene Bigham KB0GU
----- Original Message -----
From: "jimlux" <jimlux@earthlink.net>
To: "David Jordan" <wa3gin@comcast.net>
Cc: <towertalk@contesting.com>; "'Samir Popaja'" <7s7v@adamomail.se>;
"'Richards'" <jruing@ameritech.net>
Sent: Tuesday, November 25, 2008 10:45 PM
Subject: Re: [TowerTalk] Was "43ft Vertical Feeding
> David Jordan wrote:
>> The high voltage appears at the tip of the vertical, where the corona
>> ball
>> goes. I believe the feedpoint is the high current portion of the antenna
>> where most of the radiation starts...
>>
> only on a 1/4 wave antenna. Short antennas or Antennas close to a
> multiple of a half wavelength at the operating frequency can have very
> high voltages at the feedpoint.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|