Hi Jeff
I shunt fed my 64' on 80, and found the signal levels from it were
well below my half-sloper on another tower. I spent quite a bit of
time trying to get it to work on 160, and in the end, I gave up on it.
What I ended up doing was putting up was two half-slopers for 80 (one
for CW and one for phone, and an inverted L for 160.
Makes for a great DX combination :-) Make sure you add radials to the
bottom of the tower - it won't play well without them.
Tom - VE3CX
On Sun, Nov 9, 2008 at 7:00 PM, <w7jwc@charter.net> wrote:
> Hello:
>
> I was wondering what would be the best way to use the trylon tower for 160
> and 80 meters. I was thinking about shunt feeding the tower. Any ideas.
>
> Thanks for your time.
>
>
> Jeff
> W7JWC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|