Towertalk
[Top] [All Lists]

Re: [TowerTalk] Thrust bearing re-grease

To: ve5ra@sasktel.net, w3ea@hotmail.com, towertalk@contesting.com, draxfelton@gmail.com
Subject: Re: [TowerTalk] Thrust bearing re-grease
From: K7LXC@aol.com
Date: Mon, 3 Nov 2008 13:14:09 EST
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
In a message dated 11/1/2008 5:56:02 P.M. Pacific Standard Time,  
ve5ra@sasktel.net writes:

>  So how do we explain Wayne's experience where lightly  greased did a much
better job than non-greased?  Maybe there is no one  set recommendation
but instead two.  
 
    Nope. Don't grease it if you want to follow the  manufacturer's 
recommendation. 
 
    So how do you know if "did a much better job"?  Based on what? This is 
another anecdotal story that may or may not be useful  information. 
 
    In all things, follow the LXC Prime Directive to  "DO what the 
manufacturer says" and you'll typically have better and safer  results.
 
Cheers,
Steve    K7LXC
TOWER TECH 



 
**************Plan your next getaway with AOL Travel.  Check out Today's Hot 
5 Travel Deals! 
(http://pr.atwola.com/promoclk/100000075x1212416248x1200771803/aol?redir=http://travel.aol.com/discount-travel?ncid=emlcntustrav00000001)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>