In regards to identifaction of any CDE/HyGain Rotor system follow this link
to Norms rotor service he has a help page on how to properly identify your
rotor.
http://www.rotorservice.com/serv3%20identify.htm
BTW that 5 630 indicates it is a series Ham M or Ham2 series 5 made in the
year of 1976 the 30th week of the same year...
Regards,
Marc R. Tessier - VE3TES
ve3tes@cogeco.ca
http://home.cogeco.ca/~ve3tes/
http://www.eQSL.cc/Member.cfm?VE3TES
http://www.qrz.com/ve3tes
> Message: 4
> Date: Mon, 27 Oct 2008 18:07:19 -0700
> From: "WA6RKN" <WA6RKN@ARRL.net>
> Subject: Re: [TowerTalk] HAM IV vs. Tailtwister
> To: "Tower Talk" <towertalk@contesting.com>
> Message-ID: <01ad01c93899$86b7e440$cd01a8c0@main>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=response
>
> The only thing stamped on mine are the numbers: 5 630.
>
> I wonder if there is any significance to those numbers?
>
> ----- Original Message -----
> From: "Dennis Petrich" <radioart@charter.net>
> Subject: Re: [TowerTalk] HAM IV vs. Tailtwister
>
>
>> It should be stamped into the metal down near where the wires are
>> connected. At least it is on mine....
>
>
>
> ------------------------------
>
Regards,
Marc Tessier - VE3TES
ve3tes@cogeco.ca
http://home.cogeco.ca/~ve3tes/
http://www.eQSL.cc/Member.cfm?VE3TES
http://www.qrz.com/ve3tes
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|