Towertalk
[Top] [All Lists]

Re: [TowerTalk] rotor-to-beam shock obsorber problem/solution

To: towertalk@contesting.com, alwilliams@olywa.net
Subject: Re: [TowerTalk] rotor-to-beam shock obsorber problem/solution
From: K7LXC@aol.com
Date: Mon, 27 Oct 2008 18:16:49 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
In a message dated 10/27/2008 12:59:52 P.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  Thanks for reminding us where to find this  information.  It is on page 
7-29.
While watching my Steppir Monstr  whip around even in moderate winds I
suspect that it isn't the wind  velocity but rather the sudden shock that 
causes
the boom to slip on  the mast.  I will appreciate additional information from
anyone who  has used one.

If you're using an Orion rotator  and mast clamp, the clamp is why your 
antenna is slipping. It has 2 fatal  problems.
 
Cheers,
Steve    K7LXC
TOWER TECH 



 
**************Play online games for FREE at Games.com! All of your favorites, 
no registration required and great graphics – check it out! 
(http://pr.atwola.com/promoclk/100000075x1211202682x1200689022/aol?redir=
http://www.games.com?ncid=emlcntusgame00000001)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TowerTalk] rotor-to-beam shock obsorber problem/solution, K7LXC <=