I have guy wire and all that I need to attach it finally.
Therefore, I am presently reading the Rohn Catalog on the section on guying.
It shows how to guy a tower if it is a 40', but mine is not that tall. It is
only approx 28 feet to the top of it since I have two
10' sections and the top section with the built in mast is only 8' tall and I
had to bury about three feet.
So that is 28 minus three or 25 feet without the 10 foot mast.
I am trying to figure out the distance from the tower to place the guy posts.
I am planning on mounting the guy bracket on the tower about 4 feet below the
rotor which in mounted on the rotor plate in the top
bay of the upper section of the tower (approx 5' below the top).
How far should I put the guy posts under these circumstances?
Or better yet is there a formula I can use in all situations of height.
73 fer nw es gud DX,
QSL VIA: LotW, BUR, e-QSL
Bob AD5VJ
http://www.ad5vj.com/
Old Calls WB5ZQU, WY5L/KH3, KE5CTY, N5IET
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|