Towertalk
[Top] [All Lists]

Re: [TowerTalk] beverage questions

To: <ad4hk2004@yahoo.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] beverage questions
From: "Rex Lint" <rex@lint.mv.com>
Date: Thu, 23 Oct 2008 10:37:09 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
> I use aluminum fence wire - 17 gauge

How does this work for radials? OK?


      -Rex-
 
K1HI
      Rex Lint
      Merrimack, NH 


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Dennis OConnor
Sent: Thursday, October 23, 2008 8:26 AM
To: towertalk@contesting.com
Subject: [TowerTalk] beverage questions

.
.
.
I use aluminum fence wire - 17 gauge - it is cheap and light and you can
tension it with two fingers. It runs nicely with a pole every 100 feet. and
it works..  My reversibles use 4 inch spacing...  A 450-600 ohm transformer
seems to about right...

I have not tried using 2 spaced wires as a single wire... It will work, but
there may be subtle problems... I am not in favor of giving Murphy an
unecessary opening for mischief... 

denny / k8do


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>