Towertalk
[Top] [All Lists]

Re: [TowerTalk] N-connector double-D punch

Subject: Re: [TowerTalk] N-connector double-D punch
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Wed, 15 Oct 2008 23:21:30 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Michael E Fox (N6MEF) wrote:
> Close but probably too big.
>
> The Amphenol drawing specifies a .634 diameter with .539 across the flats
> (Amphenol part # 83-1F)
>
> The PolyPhaser drawing specifies a .630 diameter with .535 across the flats
> (PolyPhaser DSXL)
If you are using them for Polyphasers you really don't need the flats.  
I've been using them for years and never bothered.  The Nut and washer 
will hold them securely and I've never had one turn of come loose yet. I 
do use a socket for tightening the nut. Remember they also come with a 
bracket that lets you mount them on a bulkhead, instead of going through 
one. I prefer to go through.


73


Roger (K8RI)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>