Good advice. I left the original cable clamps on the first year but they
were too much trouble and switched to stainless steel for my EF240X and 80m
rotatable dipole.The stainless steel ones have been up for several years now
without problems.
73, Larry W6NWS
----- Original Message -----
From: <K7LXC@aol.com>
To: <towertalk@contesting.com>; <cq-contest@contesting.com>;
<Force12Talk@qth.com>
Sent: Friday, October 03, 2008 6:30 PM
Subject: [TowerTalk] If you have a F12 linear loaded antenna,you could have
some trouble
> Howdy --
>
> I've had several occasions in the last several months to fix an
> intermittent problem on Force 12 linear loaded antennas. It turns out
> that all of
> them had rusted U-bolts that had deteriorated and caused intermittent
> electrical
> contact. The U-bolts are the real little ones that connect the linear
> loaded
> wires and the shorting wire.
>
> You would be well advised to include checking them during your annual
> inspection and probably replacing them. Ultimately they will all fail.
>
> Cheers,
> Steve K7LXC
> TOWER TECH -
> Professional tower services for hams
>
> PS - You are doing an annual inspection aren't you?!?
>
>
>
> **************New MapQuest Local shows what's happening at your
> destination.
> Dining, Movies, Events, News & more. Try it out!
> (http://local.mapquest.com/?ncid=emlcntnew00000001)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|