-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Pete Smith
Just a small quibble, because I agree with everything else that Gene has
mentioned - my yagis are all insulated element Force-12 designs, and they
work just fine as top-loading on 160 at low power (~200 watts). There's a
risk of flash-over on the top antenna when used this way with high power,
which W8JI suggested could be mitigated with RF chokes of the proper size
from the element to ground, which would effectively ground each element at
1.8 MHz. In this respect an LPDA would be easier to deal with than an
insulated-element Yagi, which would require the chokes at each element.
73, Pete N4ZR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
I use my KLM Logperiodic as a top load on 80m and directly grounded the 1:4
balun 200 ohm center tab to the boom
73
Peter
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|