Should be no problem leaving the SWR meter in-line. If he really doesn't want
to leave it in-line, I once used a Homemade Field Strength Meter sitting on the
dash to tune my Screwdriver antenna. (Maximum deflection on the FS meter was
the lowest SWR on my setup)
SWR is a measurement, what we are really looking for is Max power out. If
your radio is reducing power because of high SWRs you can see it on your power
meter on your rig.
Mike
AD6AA
Michael Dinkelman <mwdink@eskimo.com> wrote:
OK - this is only LOOSELY associated with antennas but I'm
asking for a friend.
Friend has a screwdriver type antenna.
Instructions say not to leave a SWR meter in-line between the
rig and the antenna and to use the rig's built-in SWR
meter when tuning antenna. The rig doesn't have a built-in SWR
meter and he can't get a hold of their "technical" support to
ask why. I maintain that it isn't an issue, he can leave the
SWR meter in-line.
I figure they just don't want to bother with explaining the
complexities of using an external meter (OMG! - FORWARD SET)
and how the power fold back circuits may necessitate him to
incrementally reset the meter as he tunes the coil.
Anything I am missing here?
73
dink, n7wa
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|