Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fwd: Heights Towers Aluminum??

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Fwd: Heights Towers Aluminum??
From: Cqtestk4xs@aol.com
Date: Fri, 15 Aug 2008 13:38:30 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I am glad to get this information. The Height tower I have in my yard  just  
now is old. I noticed that some of the weld or the Z have opened  and was 
going  
to fix that before I put the tower up. Now I may get all  the welds inspected 
 
before I put it up. I looked at the welds before  and wondered if they were 
OK,  but as I am not an expert I thought they  were OK. The welds that brook 
were 
under high tention after the Z itself  bent at these places.

Hans  N2JFS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
I have found that wire brushing reveals some of the hairline cracks that  
oxidation has covered up.  Also, check on the inside of the weld  joint.  I 
have 
discovered some hairlines there, that were not showing on  the outside of the 
joint.
 
Bill KH7XS/K4XS



**************Looking for a car that's sporty, fun and fits in your budget? 
Read reviews on AOL Autos.      
(http://autos.aol.com/cars-Volkswagen-Jetta-2009/expert-review?ncid=aolaut00030000000007
 )
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>