Towertalk
[Top] [All Lists]

Re: [TowerTalk] distance between monobanders

To: "'Blair S Balden'" <blair.balden@wmich.edu>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] distance between monobanders
From: "Lou Laderman" <lladerman@earthlink.net>
Date: Mon, 4 Aug 2008 20:14:25 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Here's a good article that should help.

http://www.ifwtech.co.uk/g3sek/stacking/stacking2.htm

Lou, WØFK 

-----Original Message-----
From: Blair S Balden [mailto:blair.balden@wmich.edu] 
Sent: Monday, August 04, 2008 10:47 AM
To: towertalk@contesting.com
Subject: [TowerTalk] distance between monobanders

Hi all,
I have a 4-element 10 meter beam for my tower.  I also want to put up a
6-meter beam, and possibly one for 2 meters as well - all on the same mast.
I know there are a lot of experienced amateurs on this forum, so my question
to you is: how much vertical spacing should I allow between the antennas?
Thanks in advance for any advice.
Blair, NP2F   



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>