Hi Tom,
The squeals caused me to replace the K1550 with the K2550 as well -
detailed on my web site. We have a horse stable across the road, and
they would all run away when I tried to lower/raise it. I figured I'd
better do something before I was accused of stampeding the herd. Now
it's WAY easier to crank the winch, but takes 310 turns to raise/lower
it. That's why I'm looking at the winch adapter idea.
73
--
Joe Hannigan - WDØM
Pagosa Springs, CO
http://www.WD0M.com
http://www.pagosarocks.com
http://www.quiltqueen.net
Tom Anderson wrote:
> Al:
>
> I originally had a (2 actually)Fulton K-1550 winch on
> my TriEx W51 crank up tower for raising and lowering
> the tower's top 2 sections only. I replaced them with
> a Fulton K-2550, because of the horrendous squeal from
> the K-1550s disc pads, etc. (which had been replaced
> when the first set completely deteriorated in the wx
> outside. I tried just replacing the pads, but could
> never get the K-1550 even apart no matter how much
> force, etc. I applied, so I got a second 1550 and the
> problem was still there, although the pads have lasted
> much longer.
>
> The squeal was so loud my neighbors would come outside
> and see who/what was screaming in the neighborhood.
> I'm surprised someone didn't call the police.
>
> Finally gave up and replaced it.
>
> Apparently TriEx formerly used a mechanical locking
> winch with the W51. A friend of mine who has a W51 a
> few years older than mine has a "mechanical" winch
> that is geared and he says that's what came with it
> from TriEx. No pads, no squeal. Its all gears.
> 73 de
> Tom, WW5L
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|