Towertalk
[Top] [All Lists]

[TowerTalk] VHF/UHF Yagi Separation

To: <towertalk@contesting.com>
Subject: [TowerTalk] VHF/UHF Yagi Separation
From: "Marc Tessier - VE3TES" <ve3tes@cogeco.ca>
Date: Fri, 1 Aug 2008 15:26:58 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hello, Firstly allow me to say what a great group of guys and Gals, we have 
here in the forum, all the wealth of knowledge and wisdom I have picked up by 
such a breed of fine individuals should help me some day return the same 
knowledge to some new comer of this hobby we call "Ham Radio"

Ok now that my brown nosing is out of the way, its my turn to pick the great 
minds here...

I plan to put 3 yagis on one tower, one yagi is a home built 19 element with a 
corner reflector for 440 Boom length on this puppy is a mere 8 feet. Below that 
yagi I plan to place a 8 element 2m Yagi with a boom length of 14 feet and 
finally I have modded my home brewed clone of the Cushcraft A505S boom length 
is some 17 + feet. Now my question is what should I have both ideally, and 
minimally for spacing's between each yagi, feel free to reply either on or off 
this reflector, I personally hate it when it is done off the reflector it helps 
others at the same time , so do what ever pleases you most.


Regards,

Marc Tessier - VE3TES
http://home.cogeco.ca/~ve3tes
http://www.eqsl.cc/Member.cfm?VE3TES
ve3tes@cogeco.ca
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>