HI Guys:
I'm in the need of a good advice , the idea that is simple let me explain it
110 ft of Rohn 25 plus pipe on top , ceramic insulators to break the guy wire
and several pieces of phillystran for the top guys, non insulated from
ground, with gamma match to adjust to 160m , at least 60 radials 1/4 wave.
This tower dedicated for 160m but want to support a 80m dipole 4sq like comtek
show in their web page, the tips toward the tower and the center away from
the tower like < I > .
Will hear from you guys if this idea will work like I want or what can be
better
Inverted L's 4 sq hanging from this tower ?
Use the tower insulated ?
Interaction ?
Impossible or not recomended ? why?
at this moment we are planning the tower installation and have the time to do
it correctly.
I get the idea from ON4UN set up.
All the advices will be greatly appreciated we want to have it ready for the CQ
WW .
Hector XE2K
Hector Garcia XE2K / XF1K
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|