Towertalk
[Top] [All Lists]

Re: [TowerTalk] 160/80m Inverted L dualband design

To: Pat Rundall <pat@n0hr.com>
Subject: Re: [TowerTalk] 160/80m Inverted L dualband design
From: hasan schiers <schiers@netins.net>
Date: Wed, 02 Jul 2008 12:11:26 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Pat, what are the details of your trap? I'm using an inverted L for 80m, about 5' away from my tower and have been VERY happy with its performance. I've often thought of putting a trap in it and extending the sloping section to get 160 m on it, but have not seen either a commercial trap or design for a trap that I was happy with. What resonant freq did you choose for the trap, and how is it constructed? Thanks, 73

...hasan, N0AN

Pat Rundall wrote:
I am contemplating the construction of a dual band inverted L for 160 and 80
meters. It would be a quarter wave design with a sloping top and mounted off
of the side of my self supporting tower.

I have modeled it in MMANA and am looking for advice on the design,
improvements, matching unit/trap ideas, alternatives, etc.

You can see what the design looks like, SWR/gain plots, design
considerations, etc. here:
http://www.n0hr.com/Dual_band_Inv_L.htm

If you have input, I would certainly love to hear it.

73
Pat N0HR
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG. Version: 8.0.134 / Virus Database: 270.4.3/1529 - Release Date: 7/1/2008 7:23 PM
  
No virus found in this outgoing message.
Checked by AVG.
Version: 8.0.134 / Virus Database: 270.4.3/1529 - Release Date: 7/1/2008 7:23 PM
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>