I have 2 crankups, 72 and 131 ft and that is exactly how I do it. I put the
antennas on them or remove them with the towers nested.
73, Dan, N5AR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Michael Fox (K5MEF)
Sent: Friday, June 27, 2008 2:15 PM
To: towertalk@contesting.com
Subject: [TowerTalk] US Towers MA-550 and ladders
I'm considering a US Towers MA-550 tubular crank up. Plan to put a Steppir
3 el on top. Problem is, I don't have room in the back yard to lean over
the tower with the antenna on top.
So, question is, is it o.k. to lean an extension ladder up against the tower
(assuming a suitable safety device at the top of the ladder to keep it from
slipping to the side) in order to attach or work on the antenna/mast? Tower
would be in the fully cranked down state, of course.
I'd just hate to have to get a cherry picker every time I need to check
something up there.
Thanks,
Michael K5MEF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|