Two items -
1) I just swapped a Yaesu 2800 for my HamIV in Rohn 25. There was plenty of
space in the 25AG4 top section. This is the top section with no Z bracing in
the top two cross braces. When I asked the question (of a 2800 in 25G) of
this group there were a number of responders who felt it wouldn't fit. I just
wanted to let everyone know there is plenty of space - at least on this
particular top section. It will not fit in a straight section - the z brace
interfers.
2) Question - I noticed the leg bolts are getting a little rusty on the 25G.
Can I replace these in place a bolt at a time with new ones or is there two
much downward force, especially on the lower sections. The tower is 90 feet.
I am lucky in that I live almost next door to Hill Radio and can pick up Rohn
stuff any time with no shipping.
Thanks --
Keith
AC9S
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|