Gin-Poles are normally used to raise tower sections where you have to lift
them up above the current top of the tower. They are not required for
putting up most antennas unless maybe a vertical antenna that has to mount
on top of the tower and can't be handled some other way. If you are just
putting an antenna on the side or a small antenna on the top just pull it up
with a rope through a pulley hooked on a leg of the tower.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of WA6RKN
> Sent: Wednesday, June 18, 2008 18:58
> To: towertalk@contesting.com
> Subject: [TowerTalk] Need to Find.......
>
> .....a jin-pole that our club (Wide Area Data Group, in Reno, Nevada) can
> rent/use/borrow so we can install a 6 meter repeater antenna on a 50 foot
> tower.
>
> Any suggestions?
>
> Obvously, we don't want to buy one. (OUCH!)
>
> Any suggestions or help would be greatly appreciated!
>
> 73's
>
> Joe Wolfe
> WA6RKN
> Co-Chairman, WADG
> 1 775 746-2733
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|