While shutting down my station tonight after working
the WPX contest, I accidentally flicked the power
switch to the OR2800DC control box off and then back
on quickly. When I did this, the display showed that
a heading of 166 degrees, which is the CCW limit,
instead of the 270 degrees it was set to before I shut
down.
Not sure what happened.
I used the "system cal" mode to get the readout back
to the right heading.
Was this the correct procedure or should I hace not
changed the system cal heading?
73, Jeff
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|