The world of shrink tubing has come a long way...look at the
below address....just skimming the ad I see tubing at 3" offered
.... I use their HD adhesive type on all my connectors and it is
something else....I took a piece 2 foot long applied it to RG213,
weighted it on a set of lab scales......then shoved it into a flower
vase filled with water.....pulled it after 30 days, dried it. an put
it on the scales......Zero weight gain.....so..Judge for your self......
http://www.buyheatshrink.com/heatshrinktubing/4to1polyolefin.htm#B
-Bill
At 04:40 PM 5/18/2008, Roger (K8RI) wrote:
>Marc Tessier - VE3TES wrote:
> > Hello what I did was remove the shrink tubing all together and
> reinstalled newer stuff, the type I was able to get my mitts on had
> a similar sealant like the original tubing had. The manufacturer
> name is Raychem, Part # TCS2-15/17 Now this stuff was a bit larger
> than actually needed, so look for stuff about 35% larger than the
> area you wish to cover, i.e. if the coil is 1.25" try for stuff
> that is 1 5/8" or similar in size in non shrunk dimensions...Most
> heat shrink tubing specs will give min and max diameter size before
> and after heating...
> >
> >
>Good industrial grade heat shrink will shrink to about 25-30% of the
>original size. IOW, from 0.88" original size (really closer to an
>inch) to 0.22" minimum after shrinking for the 3M stuff. I don't think
>that is made in large enough sizes to go over those traps though. OTOH
>the stuff available out there covers a wide range of quality and size.
>
>Good Luck,
>
>Roger (K8RI)
> > Good luck with your R5, and if you need any other info I maintain
> a web page mostly devoted to the R7 , but many of the traps used on
> the R7 are used on the R5...
> >
> > 73 and hope to meet you on air soon !!!
> >
> > Regards,
> >
> > Marc Tessier - VE3TES
> > My R7 page= http://home.cogeco.ca/~ve3tes
> > http://www.eqsl.cc/Member.cfm?VE3TES
> > ve3tes@cogeco.ca
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|