Towertalk
[Top] [All Lists]

Re: [TowerTalk] yaesu rotors

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] yaesu rotors
From: "David J Windisch" <davidjw@cinci.rr.com>
Date: Sun, 27 Apr 2008 10:56:00 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi, Wayne:
Fwiw, I've had a "pistol" PST61C with TH11 and CD402 stacked on a 23' moly 
mast atop a 30M tower.  Other than a blown chip in the control box and 
wind-caused slippage due to not tightening the mast clamp sufficiently, 
there have been no problems.   I'd buy another if necessity arose.
73 Dave N3HE

----- Original Message ----- 
From: "Wayne R Hudson DO" <whudsondo@bright.net>
To: <towertalk@contesting.com>
Sent: Saturday, April 26, 2008 12:20 PM
Subject: [TowerTalk] yaesu rotors


> Am putti9ng up a KT36XA at 120 ft and am thinking of rotors. The T2X wont
> survive much in Ohio winter and spring winds
>
> Prositel is too big and cumversome and I worry abt service.
>
> Yaesu is questionable. I had one and it worked for less than a yr.are they
> any better now and can you get them fixed in the US
>
>
>
> Any ideas
>
>
>
> Hud, K5ZG
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>