Towertalk
[Top] [All Lists]

Re: [TowerTalk] Vertical plans

To: "'Bob Maser'" <bmaser@tampabay.rr.com>, "'W5CPT'" <w5cpt@bellsouth.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Vertical plans
From: "Scott MacKenzie" <kb0fhp@comcast.net>
Date: Sun, 6 Apr 2008 12:35:22 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
If you can't put up a full size 4 square array with at least 5 miles of
radial field - you are wasting your time and any one else that will have to
try and hear your puny signal.  It is a waste of money and time to put up
anything less.  

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Bob Maser
Sent: Sunday, April 06, 2008 11:08 AM
To: W5CPT; towertalk@contesting.com
Subject: Re: [TowerTalk] Vertical plans

Why not just find a used HyGain Hytower and put that up?  I have been using 
a homebrew version of it for the last 4 years and it really works fine.  you

get 80/40 and 20 with no coils and it is 53' tall, requiring one yard of 
concrete.

Bob  W6TR
----- Original Message ----- 
From: "W5CPT" <w5cpt@bellsouth.net>
To: <towertalk@contesting.com>
Sent: Sunday, April 06, 2008 10:15 AM
Subject: [TowerTalk] Vertical plans


> Here is what I plan to do for an 80M vertical.  Please feel free to advise

> what else I might do or to warn me what not to do.
>
>
>
> I am going to Dallas TX in June for HamCom and while there I plan to visit

> Texas Towers and purchase enough aluminum to build an 80M vertical.  I 
> plan on getting 4 each 12 foot pieces of tubing starting at 2" for the 
> main radiator. I also plan on getting 3 each 12 foot pieces of 3/8ths 
> tubing for the top hat.  This will give me a 46.5' tall radiator with a 
> six part 6 foot each top hat.  My plan is to cross drill the top section 
> which will be 1.625" and space the three sets of spokes about an inch 
> apart as close to the top as I can drill. I will use hose clamps to keep 
> them in place. The base will be a set of insulated clamps from 
> DXEngineering to a plate attached to a 4X4 sunk in the ground.
>
>
>
> I then plan to erect it over about a mile of ground mounted radials evenly

> distributed in a circle in my yard (I love living out in the country) and 
> sticking my MFJ-259 on the feed to determine the amount of matching I will

> need.  I assume I will need some inline L to bring it to resonance.  I 
> realize it will probably not cover the whole band but I will tune it for 
> the center and let the tuner in my radio widen the usable bandwidth.
>
>
>
> Your comments please.
>
>
> Clint - W5CPT
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>