On 3/20/08, Dave Hachadorian <K6LL@arrl.net> wrote:
> The quad loop must be continuous, with no insulators.
Dave - Thank you for addressing my question. You point out something
here - this was my 75 meter loop - which is not parasitic. Its driven,
so its broken at the feedpoint with an center insulator.
Would that cause a problem? The manual gave one example for reading
antenna resonance - a ground mounted vertical. It showed a loop in the
vertical section of the antenna.
-Scott, WU2X
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|