Hi All,
I recently picked up a used Orion OR2300 rotor that I want to put into
service. This is an older rotor from 1992, made by Orion Business
International, Inc. I have some questions:
1. I have the owners manual for it, but its pretty thin. I need to
know what kind of jacks this things uses. I didn't get the middle
cable, so I need to make up a new cable with connectors. The manual
has Orion part numbers for these but doesn't say what they are. They
are like 3/4" diameter black plastic with 7 pins. Perhaps M2 Inc
handles these things? Maybe they could help me with my other
questions?
2. There is also a 8 pin jack on the controller - I think this is some
kind of DIN jack. There is nothing in the "User's Manual" about this,
nor really the operating of the thing. I am guessing/hoping this might
be related to hooking to a PC?
Any other comments/insight you have about this model rotor would be
appreciated, esp. if you are using or have used one (no reviews on
eham, btw). Mine has a 28VAC motor. All it all it looks very heavy but
for some unknown reason the factory powder coating it basically
falling off it right now.
-Scott, WU2X
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|