Towertalk
[Top] [All Lists]

Re: [TowerTalk] Optimum yagi stacking distance

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Optimum yagi stacking distance
From: "Richard HIll" <rehill@ix.netcom.com>
Date: Sat, 19 Jan 2008 12:27:15 -0800
List-post: <mailto:towertalk@contesting.com>
W3ZZ has some interesting information in the January QST focused on 50 mHz
and up but perhaps the calculation of effective aperture is relevant to HF?
(Page 82-83).

Rich
NU6T

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Billy Cox
Sent: Saturday, January 19, 2008 11:39 AM
To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Optimum yagi stacking distance


Pete, N4ZR wrote a great article in the July/August
1996 NCJ title titled, "A Preliminary Look at
Improved Stack Spacing for Short-Boom Tribanders".

That might also provide insight as to specifics.

Hope this helps ...

73 de Billy, AA4NU


>From: Gary Slagel <gdslagel@yahoo.com>
>Date: Sat, 19 Jan 2008 08:14:30 -0800 (PST)
>List-post: <mailto:towertalk@contesting.com>
>
>More questions from a yagi stacking rookie!
>
>I've been using the HFTA software to try and get an
>idea of the optimum distance to stack a couple yagis
>for best performance.  I'm stacking 10/15/20
>tribanders for increased performance.  I was really
>surprised that on most bands the optimum performance
>seems to be with them separated by only about 10'...
>for instance 65' and 56'!  I expected it to be more
>like 20' to 30'!
>
>I wonder how this jibes with folks with real
>experience?
>
>Thanks,
>Gary

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>