I sub- cotracted the base out for my rohn 45G tower. The cost in 2003 was
$1500.00. I supplied the short section the rest was turn key concrete,pump
digging, Inspection, the hole ball of wax.Money well spent IMHO. The only other
things I had done by others were Permits and electrical. Much easier to pass
inspections when they know the contractors, oh I always if possible use a
crane. Cuts labor cost way down.
Joe Patrick K4XZ
--
JOE PATRICK
SENIOR PLUMBING/MECHANICAL
INSPECTOR CITY OF BOYNTON BEACH
-------------- Original message from K7LXC@aol.com: --------------
>
> In a message dated 12/31/2007 9:48:00 P.M. Pacific Standard Time,
> towertalk-request@contesting.com writes:
>
> k5fnq@cox.net>
> Subject: [TowerTalk] Cost of cement base
> To:
> Message-ID: <06e801c84c07$86301800$0201a8c0@mrblonde>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Just wondering the amount one might expect to pay for installing a base
> section and the variations around the country
>
> Rohn 55G requires 5.3 cubic yards of cement, with rebar and gravel.
> The cost of digging the hole (back too far gone at this stage)
> and the cement job is estimated to be about $1,400.
>
>
>
>
>
>
>
> **************Start the year off right. Easy ways to stay in shape.
> http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|