Can you give some details about the choke which you added to the
feedline? Ferrite mix, number of turns, size of core? At my
receive-only location I have a very high level of RFI/EMI to deal with.
Colman Ahern.
Berkeley.
> With the flag, I've taken great care to isolate it from the ground
> because I know common mode pickup can totally destroy such a low gain
> antenna's utility. The transformer is an isolated winding type on a
> binocular core as described in Low Band DXing, and I added a *second*
> 1:1 isolation transformer near the base of the mast the flag is on,
> and yesterday I added a several thousands-of-ohms choke on that
> feedline back near the shack. The whole time I was trying to reduce
> the noise I heard on an AM portable radio with it's ferrite stick
> antenna coupling to the magnetic field around the coax feeding the
> flag. The new choke helped quite a bit and it seemed to help the
> noise level on the flag as well.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|