My source for the RFC-1703-T has been RF Connection, and it's still on
Joel's web site.
It sounds like an RFI part number, but may not be. I can verify though
that it is sized correctly for LMR-400 & LMR-400UF, and is a quality
connector.
Steve K8LX
DMartin560@aol.com wrote:
>
> What does that connector fit?
> A search on the RF Industries site can't find it?
>
> Dwayne
>
>
>
> RFC-1703-T
>
> Steve K8LX
>
> RICHARD SOLOMON wrote:
>> What is the proper UHF Crimp Connector for LMR400-UF ?
>> I have tried two, RFU507-ST and SI and find I have to remove
>> two strands of the center conductor before it fits.
>>
>> Surely there must be a connector that fits ??
>>
>> Thanks, Dick, W1KSZ/7
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|