Hi,
I found what I believe to be a Rohn brand, freestanding tower. The
tower looks like its good shape, so I was wondering if any one could
identify this tower. Any ideas on the specs?
http://picasaweb.google.com/mcclements/Tower380RohnSSV
There are four 20' sections total (80 feet total), the bottom section
is 27" across, outside diameter. The bottom mounting flanges are
4.5"x4.5". That was all I was able to measure from the ground. The
rungs on the bottom section are bolted whereas the top three sections
appear to have the runs welded.
Any info/ideas would be appreciated.
-Scott, WU2X
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|