You can climb the tower and retighten the bolts. They usually come lose
after the first tightening so I usually (re)snug them before I raise the
tower.
If your rotator has a calibrate knob you can just compensate or I put a note
on mine that says the antenna is X degrees out till spring comes!
Dan W8CAR
----- Original Message -----
From: "bill rubin" <brubin2010@gmail.com>
To: "TowerTalk" <towertalk@contesting.com>
Sent: Tuesday, October 02, 2007 3:12 PM
Subject: [TowerTalk] beam slippage
> Well I just mounted steppir 3 ele on the new tower and the next day we had
> a
> storm with 30+ mph winds. The beam is now of by aprox. 10 degrees. What
> can I do to fix this ?
>
> 73's Bill
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|