You should read the manual and use their formula for calculating the antenna
load.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu G800S rotor ind loading??
From: Bob Dorsey <zf2rf@yahoo.com>
Date: Wed, 19 Sep 2007 15:36:19 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
I recently acquired a Yaesu G800S rotor and Sommers
XP504 yagi (both used). I am considering adding the
17 and 30M mods to the Sommers, making it into an
XP507. By doing that, the wind loading would be 11 sq
ft, according to mfr.
I can't quite determine what the actual max wind load
is for this rotor. One thing says 10 & another says
17.
Does anyone know what this rotor is rated for? Mni
tnx!!
Bob W4RQ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|