If you're worried about the glove conducting you're probably doing something
you shouldn't be doing anyway.
Go to a woodworking supply store like Woodcraft. They have carvers gloves
made of Kevlar.
73,
Gary
++++++++++++++++++++++++++++++++++++++++++++++++
K9GS
Gary Schwartz email: k9gs@arrl.net
Check out K9NS on the web: http://www.k9ns.com
Society of Midwest Contesters (SMC) GMDXA
++++++++++++++++++++++++++++++++++++++++++++++++
----- Original Message -----
From: "Perry - K4PWO" <k4pwo@comcast.net>
To: <towertalk@contesting.com>
Sent: Tuesday, September 04, 2007 11:06 PM
Subject: Re: [TowerTalk] LMR400-PL259s
>A good glove for cutting protection is a fillet glove. It a stainless
>steel
> mesh glove and you can find them at fishing supply stores like Bass Pro.
> Of
> course, you'll need to keep well away from live circuits with it on! ;->
>
> ----- Original Message -----
> From: <donovanf@starpower.net>
> To: <towertalk@contesting.com>
> Sent: Tuesday, September 04, 2007 10:07 PM
> Subject: Re: [TowerTalk] LMR400-PL259s
>
>
>> Box cutters are dangerous tools, intended to be used at a safe distance
>> from body parts. Using a box cutter near your opposite hand or other
>> body
>> parts can easily result in an accidental deep cut right to the bone, and
>> now you have a serious injury to deal with.
>>
>> If you use a box cutter to prepare coaxial cable, be sure you wear a
>> substantial glove on the opposing hand!
>>
>> 73
>> Frank
>> W3LPL
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|