There is a lot of information on this subject in the archives. If you don't
have any specific problems you may not even need an RF ground.
73,
John
To: <towertalk@contesting.com>
Subject: [TowerTalk] Rig on Second Floor - Grounding
From: "D. Scott MacKenzie" <kb0fhp@comcast.net>
Reply-to: kb0fhp@comcast.net
Date: Sat, 25 Aug 2007 14:32:12 -0400
List-post: <mailto:towertalk@contesting.com>
All:
My son, who recently got his license, is looking to use his FT-817 on the
digital modes, specifically PSK31, RTTY, etc. His bedroom/shack is on the
second floor. I have a simple 20M dipole (that we built) hanging off a tree
near his window.
I plan to use a Rigblaster NOMIC or equal. He will use a small power supply
and L-100 tuner (when I get another antenna up in the air).
How is the best way to achieve an RF ground? Any suggestions on an
electrical ground? Remember - he is on the second floor.
Thank you.
Scott aka KB0FHP
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|