Towertalk
[Top] [All Lists]

[TowerTalk] 40M4LLDD assembly issue

To: towertalk@contesting.com
Subject: [TowerTalk] 40M4LLDD assembly issue
From: Paul Baldock <pbaldock@verizon.net>
Date: Fri, 10 Aug 2007 10:46:57 -0700
List-post: <mailto:towertalk@contesting.com>
I'm putting the 40M4LLDD together and in general it seems to be well 
made. However a see a potential issue with the way they connect the 
liner loading rods to the linear loading arms and wonder if anybody 
has experienced or anticipated a problem and come up with a solution.

The aluminum 3/16" linear loading rod is attached to the aluminum 
linear loading arm by going through an oversize hole at an angle and 
being held in place by a small SS set screw threaded into the 
aluminum. It seems over time this could become a very poor electrical 
connection.

- Paul KW7Y

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] 40M4LLDD assembly issue, Paul Baldock <=