I got this suggestion from a local electrical engineer (here in
BC,Canada) regarding grounding a 25g 96' self supporting tower on a hilltop
where we hit solid rock after 12".
I would appreciate feedback on this.
Thank you
Mike.
>
> The new standard for grounds is a metal plate rather than a bar. I
> suggest
> they get a piece of conductive metal about 2 square feet in area, weld or
> bolt the ground cable to it and bury it under the dirt about 4" to 6".
> That
> is as good as a rod.
>
> Dave
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|