I made an error in my earlier post when responding to shunt feeding a tower on
160M. My tower is a three section crank-up and I stated that I attached the
shunt wire to the top of the first section at 24 feet. This was wrong. I
actually attach the wire to the top of the middle section which is at the 44
foot level when the tower is up. I hope this keeps someone who is trying to
shunt feed a US Tower HDX55 from wasting a lot of time.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|