Towertalk
[Top] [All Lists]

[TowerTalk] Fw: guys

To: <towertalk@contesting.com>
Subject: [TowerTalk] Fw: guys
From: "Ron Todd" <ron@k4wz.com>
Date: Fri, 20 Jul 2007 12:35:25 -0400
List-post: <mailto:towertalk@contesting.com>
Gee,  They had a stamp on the end  Rated at  15,000  lbs.

Thanks

Ron


----- Original Message ----- 
From: k4pi 
To: Ron Todd 
Sent: Friday, July 20, 2007 11:46 AM
Subject: Re: guys


How much is that insulator rated for?  Pound wise..
  ----- Original Message ----- 
  From: Ron Todd 
  To: Ham, Mike K4PI 
  Sent: Friday, July 20, 2007 4:17 PM
  Subject: guys


  I can drop the guy wire on the tower down 1 foot and still be 6" off the 
roof. Drop it down 2' on the tower and the guy is about 2" off the roof.

  I have a 4 foot insulator that Ga Power uses. What do you think of using that 
instead of the Phillystran ? If I use the Phillystran I would have to change 
back  over to wire befor I hit the back post, because someone could reach up 
and cut and I need the wire for my tension testor.

  what u think
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Fw: guys, Ron Todd <=