You need a short run of wire near the ground so that where you can use the
guage. They do that to keep some kid from cutting or a fire will burn the
Phillistrain.
----- Original Message -----
From: "Dubovsky, George" <George.Dubovsky@andrew.com>
To: "Robert Carroll" <w2wg@comcast.net>; "R Atkins"
<rusty_atkins@yahoo.com>; <towertalk@contesting.com>
Sent: Wednesday, July 11, 2007 1:13 PM
Subject: Re: [TowerTalk] This is what I used to tension my guy
wiresanditworked .
> Philly is larger diameter, so it doesn't usually fit in the notches in
> the gage. However, you will (should) have an EHS leader at the
> turn-buckle end of the guy, so you will measure tension on that.
>
> 73,
>
> geo - n4ua
>
>> -----Original Message-----
>> From: towertalk-bounces@contesting.com [mailto:towertalk-
>> bounces@contesting.com] On Behalf Of Robert Carroll
>> Sent: Wednesday, July 11, 2007 12:46 PM
>> To: 'R Atkins'; towertalk@contesting.com
>> Subject: Re: [TowerTalk] This is what I used to tension my guy wires
>> anditworked .
>>
>> Will this type of gauge work with phillistran?
>>
>> 73
>> Bob W2WG
>>
>> -----Original Message-----
>> From: towertalk-bounces@contesting.com
>> [mailto:towertalk-bounces@contesting.com] On Behalf Of R Atkins
>> Sent: Wednesday, July 11, 2007 12:35 PM
>> To: towertalk@contesting.com
>> Subject: Re: [TowerTalk] This is what I used to tension my guy wires
> and
>> itworked .
>>
>> Yes, they work very well, and I am ordering one, but I need a way to
> get
>> the
>> tension close.. temporarily. I have to have this done by Friday
> afternoon
>> for the contest this weekend and I'm not going to pay for overnight
>> shipping... hence my question. :-/
>>
>> Thanks!
>>
>> >This is what I used to tension my guy wires and it worked .
>> > http://www.championradio.com/rigging.html Professional Model
>>PT-2
>> 79.00
>>
>>
>>
>>
>>
>>
>>
> ________________________________________________________________________
> __
>> __
>> ________
>> Need Mail bonding?
>> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
>> http://answers.yahoo.com/dir/?link=list&sid=396546091
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
> ------------------------------------------------------------------------------------------------
> This message is for the designated recipient only and may
> contain privileged, proprietary, or otherwise private information.
> If you have received it in error, please notify the sender
> immediately and delete the original. Any unauthorized use of
> this email is prohibited.
> ------------------------------------------------------------------------------------------------
> [mf2]
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|