We deal with grounds on an on going basis in the broadcast industry.
"Weaving" these straps to form a "screen" would give you a more effective
area of ground. I would suggest that you split them in half and see if you
can form a 10 X 10 screen, then solder any ground radials onto that screen.
Kent
K9EZ/4/lid/B0ZO
Fuquay-Varina, NC
QRV 517 meters (and others), 160m - 70CM, and a few other fun channels.
On 6/25/07, Barrie Smith <barrie@centric.net> wrote:
>
> I'd like to improve my grounding system, which, due to clay and rocks, is
> mostly nonexistant.
>
> I have a friend who owns a sheet-metal shop. While visiting him recently
> I saw a pile of copper sheets that were left over from a large job, and were
> going to be sold as scrap.
>
> Some of these sheets are five foot long and 4 inches wide.
>
> Could I create a "good" ground using up to several of these sheets buried
> from 6" to a foot underground?
>
> Ideas appreciated.
>
> 73,
> Barrie, W7ALW, DN36au,
> QRV 6M, 432 & 1296 EME
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|