Towertalk
[Top] [All Lists]

Re: [TowerTalk] Dish On A Tower

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Dish On A Tower
From: Jim Hoge <knowkode@sbcglobal.net>
Date: Sat, 19 May 2007 17:27:04 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
Jim,
   
  That's assuming the dish will be aimed at the horizon. What is the intended 
application, terrestrial or lunar? If for EME, I don't understand the height 
above ground. The advantage of EME besides being lower is that the dish can be 
parked aiming straight up, greatly reducing drag. Still needs a robust mount 
though. If for terrestrial, possibly giving up a few dB for a yagi array is an 
option. My 4x array of 35? element M2 yagis produces ~24 dB while a dish should 
be ~30dB. Considerably smaller installation too.
   
  my two cents,
  Jim W5QM

Jim Lux <jimlux@earthlink.net> wrote:
  At 03:11 AM 5/19/2007, JMLTINC@aol.com wrote:
>
>Hello to all,
>
>I am considering using a 10' dish for 1296. I would like to see it up 70'.

To a first order, you're looking at a drag area of 3.14*25 square 
feet (what's that, about 80 square feet?)

In a 80 mi/hr wind (16 lb/sf, roughly) that's going to be 1280 pounds 
of wind drag!

better be a burly tower.




_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>