Towertalk
[Top] [All Lists]

[TowerTalk] US tower Mast Raising Fixture

To: towertalk@contesting.com, W3PA@aol.com
Subject: [TowerTalk] US tower Mast Raising Fixture
From: NPAlex@aol.com
Date: Tue, 1 May 2007 12:38:16 EDT
List-post: <mailto:towertalk@contesting.com>
 
 
The mounting is pretty straight forward.  The long rectangular tube  section 
mounts on the rear tab, and the two support braces connect about mid  point 
(near winch) and bolt onto the front mounting tabs.  There is only  one way it 
will all connect together.

Norm
W4QN
========================================

I have  a MRF Mast Raising fixture for a US tower HDX 589

Does anyone have  instructions on how to properly mount this fixture to the  
tower and  mast?

Thanks






************************************** See what's free at http://www.aol.com.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] US tower Mast Raising Fixture, NPAlex <=