I have aquired a tower which is made out of 3x3 L-angle which is 42x42x42
centered three legged in sections of 20 feet and has six 1/2 inch bolts
connecting each leg per section
I do not know manufacture other than it was an fm
tower taken down has ladder inside the tower and painted
international orange. I have a total of 120 feet. my
question is would 48 inch hole 20 feet in depth with 11
yards of concrete with a total of ten total lengths of 3/4" # 60 grade
rebar welded to one 20 foot single section set in pier
hole and leveled hold up the other four sections total of 100 foot
and this tower is straightin shapeand is not tapered? I'm guessing
maybe 400lbs. per section
_________________________________________________________________
Need a break? Find your escape route with Live Search Maps.
http://maps.live.com/?icid=hmtag3
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|